Frosted Glass Effect Paint MTN PRO Spray 400ml

CHARACTERISTICS:

– Very fast-drying.
– Good adhesion.
– Translucent.
– Easy to apply and repaint.
– Water resistant.

INSTRUCTIONS FOR USE:

– Shake the spray can well before use for about one minute after hearing the sound of the mixer ball.
– Apply to clean, dry surfaces. Clean surface with soap and water and allow to dry. On plastic, perform a prior test to observe the behavior of the product on the surface to be painted.
– We recommend applying two coats to obtain the frosted effect. To obtain good results, it is always better to apply two thin coats than one thick coat. The frosted effect appears as the product begins to dry. Can be repainted after 10 minutes with the same product or when it has a matt finish.
– Do not apply on surfaces in direct and prolonged contact with water, such as the inside of a shower screen.
– The product can be cleaned off gently with a cloth soaked in water. Limited resistance to abrasion.
– Invert the spray can to purge the valve after use. If the cap becomes clogged replace it with a new one.
– Do not apply to plugged in electronic equipment and use in well ventilated areas.
– Request safety data sheets